home *** CD-ROM | disk | FTP | other *** search
- Path: nyx10.cs.du.edu!not-for-mail
- From: rdavis@nyx10.cs.du.edu (Robert Davis)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Zorro-II specs needed for A500 DMA port->Zorro2 adaptor
- Date: 29 Jan 1996 08:51:03 -0700
- Organization: University of Denver, Math/CS Dept.
- Message-ID: <4eiqd7$7bj@nyx10.cs.du.edu>
- References: <4eh3tq$ret@unidhp.uni-c.dk>
- NNTP-Posting-Host: nyx10.nyx.net
- X-Newsreader: NN version 6.5.0 #3 (NOV)
-
-
- The 100-pin connector I use is the
- AMP 1-530843-1 (100pin)
- The 86-pin connector to plug into the A500 is the
- AMP 1-530843-0 (86-pin)
- at least that is what is printed on the connectors.
-
- --
- rdavis@nyx.net Robert (Bob) Davis
- Amateur Radio K0FPC
- Emporia, Kansas
-